Snowmobile Fanatics banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4,541 Posts
Discussion Starter · #1 ·
Anybody out there ever put an xtra 10 front suspension on an older wedge chassis? I would like to do it to match my 10 rear but I am not sure what is all involved.[?]
 

·
Registered
Joined
·
1,191 Posts
You will need to replace basically all your front suspension parts. This would include shocks, trailing arms, radius rods, and probably the sway bar and steering arms.
 

·
Registered
Joined
·
4,541 Posts
Discussion Starter · #3 ·
I also have a 99 xc 600 with xc-10 front and I measured and compared and the lower radius arms and steering arms measure the same. My upper arms are longer but to use the shorter arms I have to relocate the mounting holes. The trailing arms look similar do you know the differences, and I have a torsion bar and not the sway bar so I would lengthen the connecting heims to make up the height difference. Does anybody know the length of the xtra 10 front shocks I think they are 15.5 but not sure.[?]
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top