Snowmobile Fanatics banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3,130 Posts
Discussion Starter · #1 ·
Ok so i have all of the shocks, going to get new front springs, and a zr front arm. The only problems i have had so far is the bushings have all been to small on the zl shocks so i have drilled them out, and the spacers for the bottom of the ski shocks have been too long or too short because of the slightly larger shock. Will i have any problems with moving where the bottom of the shock sits about 2/3 of an inch forward to allow the shock to sit properly? Also does anyone know if the rear shocks all have the same bushings?
 
1 - 1 of 1 Posts
Top