Snowmobile Fanatics banner
1 - 4 of 4 Posts

·
Registered
Joined
·
479 Posts
Discussion Starter · #1 ·
Hey Folks,

After having my sled apart for the better part of a year, I finally got it rebuilt and back together. Now it won't start.
When trouble shooting, remember:
COMPRESSION
FIRE
FUEL

Compression is both at 110 ft/lbs.
I have good spark.
Fuel, now this is the problem. The fuel pump has four inlets/outlets. One comes from the tank/filter. And one goes to either of the carbs. I have one outlet/inlet that has nothing on it. I also have a rubber line (not a standard fuel line) coming from below the carbs ON the block that goes to nothing. Can anybody confirm that this rubber line goes onto the fuel pump?

Thanks
 

·
Registered
Joined
·
129 Posts
Yes it goes from the block to the top fitting on the fuel pump. It sucks and blows depending which stroke the engine is on and powers the fuel pump this way.
 
1 - 4 of 4 Posts
Top