i have an 81 Yamaha enticer 300.Can i put a new track on it.For the deep snow.and where and what kind of track? (if i can get one). also how do i get the length of the track? Do i just start in a spot and go around till i come back to the same place.
yamahacrazy
your really not going to get a correct measurement that way or anyway I think. i believe your sled would be a 121 in track. someone correct me if im wrong. ( also might be a 116 but i thought they went away with that with the exciter. you would be able to put a newer track on your sled as long as the lugs dont hit the tunnle. you would have to measure that.
I dont think that 300 could handle any bigger lugs. you could get a better sled for the price of a track these days.
It's probably a 116. Measure the inside all the way round.
We did the exact thing to an old SS440 (around 1980ish).
We just bought a polaris 121 track with 3/4" lugs.
Check the front clearance to make sure what will fit.
Then all we did was pull the whole skid back a couple inches to make up for the extra track. We also lowered the mounting holes to raise the machine up a bit. I think we had to make a homemade bracket for the back end but that's quite easy. I little bit of elbow grease and fooling around for an afternoon and you'll have it done.
For us it turned out excellent and you don't have to spend a lot of $$$$.
We did the exact thing to an old SS440 (around 1980ish).
We just bought a polaris 121 track with 3/4" lugs.
Check the front clearance to make sure what will fit.
Then all we did was pull the whole skid back a couple inches to make up for the extra track. We also lowered the mounting holes to raise the machine up a bit. I think we had to make a homemade bracket for the back end but that's quite easy. I little bit of elbow grease and fooling around for an afternoon and you'll have it done.
For us it turned out excellent and you don't have to spend a lot of $$$$.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
