Use a hair dryer to heat the decal then peel at the corner. I removed a few stickers a few weeks ago and I used "Liquid Wrench" to remove the residue, worked great. Then just wax the hood afterward and you'll never know there was a decal there.

 

you hit it! a hair dryer is the way to go. also goof-off sticker residue remover will work to get the marks off. Be careful with the goof-off, test it in an area not noticeable and make sure it doesn't mess with the paint

 

you can also try an iron. A nice warm temp (not steamin hot) an they'll peel right off

 

You take raw orange, sqeeze the juice out and apply to the sticker. Let it stay for 20 minutes then come back and peel. Also the hairdryer works too only if its too hot you can damage.

 

I've used a heat gun, your mom might be mad if you use her hair dryer, heat and peel, once off I got some adhesive remover made by 3M (got it at an automotive store)
Clean your hood well and polish, should look good

 

you can also try to pull them off without heating, if the stickers are fairly new they should just pull off, the adheasive can be taken off with goop-off or mineral spirits, make sure that you test try the chemicals in a inconspicous spot just incase. if the decals aren't coming off easily then try heating it doesn't take a lot of heat just enough to get the adheasive warmed up so that the decal will pull away from it.

 

Hair dryer. But we use Enamel Reducer on are stuff to take the stickers off! You can get it a paint store or Carquest!
Jake

 

SKS - check this thread: http://www.snowmobilefanatics.com/forum/topic.asp?TOPIC_ID=32262

I just used a fingernail and a little patience. I tried a heat gun.. it messed up the paint.. it was too hot. And I tried goof-off.. that ruined it too.. I do believe that 3M makes a product called 3M adheasive remover. It's in a red and white contiainer. Your local auto parts shop might carry it. Use it sparingly. And have a lot of patience... Let us know how it works out!

 

Originally posted by TeamNFG
[br]I've used a heat gun, your mom might be mad if you use her hair dryer, heat and peel, once off I got some adhesive remover made by 3M (got it at an automotive store)
Clean your hood well and polish, should look good

your right! i had to buy my mom a new hair dryer after i shorted out the other one.

 

Hair dry and WD-40 worked great. Cleaned right up.

 

Damn, looks like a lot of you dudes have hair dryers....strange...

What I feel works better than a hair dryer is to leave your Hood, (or whatever the decal is being removed from) out in the intense SUNlight for several minutes and then removed the decal. Works very well, and the excess sticky stuff can be removed with "Goof Off" or Brakleen...

 

i use a heat gun, but u can also use a hairdryer, i would be carful with a heat gun cuz it will buble your paint!

 

All ive ever used was a hairdryer and it has worked fine for me.