http://www.ebay.com/itm/POLARIS-SNOWMOBILE-CLUTCH-PULLER-93-99-INDY-XLT-580-600-SPECIAL-CLASSIC-TOURING-/370548480480?pt=Snowmobile_Parts_Accessories&hash=item56466919e0&vxp=mtr

ebay

 

nope thats the wrong one too

 

try to look for one from a 94-96 xlt and see if same puller i know a 94 puller worked on my 95 rxl but not shure in your case

 

this is where i got mine, part #20-72 is the one that should work. the one sledcrsher posted should work to
http://www.startinglineproducts.com/catalog.cfm?pageID=detail&catalogID=3&catID=24&productID=209

it sounds to me that you may have a newer twin clutch with the old 93 outer cover on it. the newer clutches have a smaller inner hole but have the same threads

 

Don't the new twin clutches have a different taper then the old ones? Would it even fit?

 

taper is the same, it will go on but have fun getting it off. you have to make a custom puller to get it back off

 

I gotcha.

 

You should check the taper, i know some P85 clutchs have a deeper taper then other ones. I found this out when i was given the wrong clutch from a shop this summer. It is the same angle of taper just deeper with a larger radius.

 

i know my clutch from rxl goes on my 98 xc 600 twin but need to use 98 clutch bolt plus some sort of sleave cause then bolt has a bit of side to side movement nothing i want to mess with plus my 98 had to use puller that is only for the 97-99 model yr nothing else works

 

Dennis Kirk part# 28-299 is the one I believe. After Polaris went to Made in USA BB motors, they went to part# 28-906. The clutch puller is for a narrow roller, used on many applications of the ATV line up