[RED_XCR_440]

Can you guys give me a quick "walk through" on replacing my hyfax "slides" on my XTRA 10? I would like to get some white ones but cant seem to find them. I will be pulling the skid so it should be easier. Thanks!

 

[TheKuskokid]

Remove the bolt up in the front that holds them on, take a big brass punch or a pice of wood, and tap them towards the rear. When you have about 6 inches or so, just grab it and pull.

 

[SKSPolarisIndy]

And when putting the slides back on, put a coating of grease on them. It'll make removing them next time easier.

 

[Clouse2411]

yeah remove the front bolt and place a piece of wood on the front and tap it with a hammer and then just pull. I just switch my slide about 10 mins ago

 

[RED_XCR_440]

WOW !!! Thanks for the FAST reply's guys!!! So you mean that little bolt up front through the tip? Seems like it would be a PITA to get that little nut off! Any ideas where I can find a pair of white ones? Can only find the black and extreme colors...

 

[xcr440]

Hold the nut with a wrench and remove the screw/bolt. Have you tried dennis kirk

 

[RED_XCR_440]

Yea kirk only has the black and the goofy colored ones. I think white would look good, guess I will have to order some black. Thanks for the help guys!!!

 

[minnesotaderek]

how about fleet farm?

 

[Clouse2411]

www.hiperf.com
www.startinglineproducts.com
i don't know if they have them but it would be worth looking at

 

[SKSPolarisIndy]

Did you check at your dealership for colored slides? I know the one up the road from me carries all sorts of colors.

 

[TriumphoverU]

oem polaris slides are white. Might cost a bit more, but if you are looking for white they could be an option for you.

 

[98700xcBB]

When I was replacing mine I also wanted the white ones, the dealer guy told me they quit making them b/c all hyfax are performance hyfax now, the white hyfax were some sort of high perfomance hyfax, thats what I was told.

 

[RED_XCR_440]

Just see that hiperf.com has the WHITE ones back in stock!!! So now time to pull the skid! Thanks for all the help guys!!!

 

[Clouse2411]

ur welcome that is what snowmobile fanatics is all about